Substitution of transferrin by FeCl3 in the development of a low foetal calf serum concentration medium for KB-26.5 hybridoma cell line

KB-26.5, a murine hybridoma cell line producing an IgG₃ monoclonal antibody used in blood type determination, primarily adapted to grow at 5% foetal calf serum (FCS) concentration has been adapted to grow at 0.5% FCS, maintaining its ability to produce antibodies at the same level. In the final step of adaptation, the addition of insulin, transferrin, ethanolamine and selenium to the media formulation was studied, using factorial assay techniques to check the effect of the different compounds and to optimize their required level for satisfactory growth and antibody secretion. KB-26.5 cells required only 20 g/ml of transferrin to adapt to 0.5% FCS medium. Furthermore, transferrin could be substituted by FeCl₃, at a relatively low level of 2 g/ml. Maximum cell density decreased by 31.5% in spinner flask test, but the antibody titer was maintained, thus the specific productivity increased. However, inoculum size had to be increased three-fold with 0.5% FCS medium in order to assure cell growth.     

Interactions between the toxicity of the heavy metals cadmium,copper, zinc in combinations and the detoxifying role of calcium in the brown algaCystoseira barbata

The toxicity of three heavy metals, Cd, Cu and Zn, and the detoxifying role of Ca have been studied for the brown algaCystoseira barbata formaaurentia after a 4-week laboratory culture. The experimental design was based upon a complete factorial design 2^k, which seems to be the first time it has been used in algal physiology. It was demonstrated that these three elements, applied jointly, act on weight-growth, chlorophyll a, c and carotenoid synthesis and Cd, Cu and Zn uptake. Cd and Zn act in synergy or in antagony, depending on their exogenous concentrations, on chlorophyll a and on carotenoid synthesis. Zn is antagonistic towards Cd and Cu on weight-growth in the combination Cd-Cu-Zn. From different element combinations, the protective role of Ca appears evident on weight-growth (Cd-Zn-Ca and Cu-Ca), chlorophyll a (Cd-Cu-Ca and Cu-Zn-Ca), chlorophyll c (Cd-Ca), carotenoid synthesis (Cd-Cu-Ca and Cu-Zn-Ca), Cd and Cu uptake (Cd-Cu-Ca) and Zn uptake (Cu-Zn-Ca). This role is confirmed by cytological investigations. This is apparently the first report concerning a Ca interaction with toxicity of heavy metals applied in combinations. However, the mechanisms of tolerance remain unknown.     

制药工程“微生物学实验”课程的项目化教学探索与实践

为了培养学生的自主学习能力和实践创新能力,按照工程教育专业认证要求基于成果导向教育(outcome based education, OBE)理念设计课程教学,将制药工程微生物学实验课实验教学项目设置成入门、进阶和自主3种项目等级。实验项目内容由浅入深、逐级递进、层层相关,教学过程以学生为中心,并结合线上教学手段和竞赛机制的支持。实践结果表明,经过项目化教学改革,在教师教学和学生学习成效两个方面均得到明显提升,学生在论文撰写能力、动手能力等方面也有了明显的进步,值得后续进一步总结和推广。     

药用植物分子农场研究进展

植物分子农场可以利用植物生产具有药物用途的重组蛋白或者次生代谢化合物,应用广泛。随着对动植物中具有药物用途的代谢途径的深入解析,代谢途径中关键限速酶或调控蛋白的功能不断被明确,如何选择植物分子农场的底盘植物和遗传改造途径等问题,特别是如何协同提高植物制药产量与品质一直是植物分子农场体系建立中面临的关键科学问题。综述了药用的植物分子农场的最新研究进展,着重介绍了底盘植物的选择与药用植物分子农场的构建策略,以期为提高分子农场应用效果提供有力的科技支撑。     

Transmission of poly(dT60) single-stranded DNA through polycarbonate track-etched ultrafiltration membranes

The objective of this study was to examine membrane filtration of a single stranded DNA (ssDNA) with 60 thymine nucleotides, and to elucidate the variables controlling its transmission across track-etched porous membranes. Dead end filtration measurements were performed using different pore size membranes (10, 15, and 30 nm) at different transmembrane pressures in solutions with ionic strength ranging from 0 to 1000 mM NaCl. The diffusivity of the ssDNA was determined using fluorescence recovery after photobleaching, yielding hydrodynamic radii ranging from 1.6 to 2.8 nm, with values decreasing with increasing solution ionic strength. Despite the small ssDNA/membrane pore size, nearly 100% rejection was observed for measurements performed with the 10 and 15 nm pore size membranes under low-ionic strength conditions. These high rejections can be attributed to strong repulsive electrostatic ssDNA-membrane interactions. With increasing ionic strength, electrostatic interactions as well as the effective size of the ssDNA decreases and the flexibility of the ssDNA increases, leading to a reduction in ssDNA rejection. A design of experiments approach was used to plan filtration experiments that adequately covered the variable space with a manageable number of experiments. The results yielded an empirical expression relating ssDNA rejection to pore size, solution ionic strength and transmembrane pressure. There was evidence of flow induced elongation at high-transmembrane pressures in the 30 nm pore size membranes, but not in the smaller pore size membranes. These results are consistent with critical flux estimates developed using a free draining model for the ssDNA.     

Environmental conditions during glycerol bioconversion affect 3-hydroxypropionic acid bioproduction by Limosilactobacillus reuteri DSM 17938

3-Hydroxypropionic acid (3-HP) is a platform molecule whose biological production was carried out by the bacterium Limosilactobacillus reuteri according to a two-step process: first, a growth phase in batch mode on glucose, then a glycerol bioconversion into 3-HP in fed-batch mode. With the objective of improving 3-HP bioproduction, this study aimed at defining the operating conditions during the bioconversion phase that increases the bioproduction performance. A central composite rotatable design allowed testing various pH levels and specific glycerol feeding rates. By establishing response surfaces, optimal conditions have been identified that were different depending on the considered output variable (final 3-HP quantity, 3-HP production yield and production rate). Of them, 3-HP final quantity and 3-HP production yield were maximized at pH 6.0 and at specific glycerol feeding rates of 60 and 55 mg_gly g_CDW⁻¹ h⁻¹, respectively. The specific 3-HP production rate was the highest at the upper limit of the specific substrate feeding rate (80 mg_gly g_CDW⁻¹ h⁻¹) but was not affected by the pH. An additional experiment was carried out at pH 6.0 and a specific glycerol feeding rate of 80 mg_gly g_CDW⁻¹ h⁻¹ to validate the previous observations. In conclusion, the results showed a significant improvement of 3-HP concentration by 13%, of specific production rate by 34% and of 3-HP volumetric productivity by 39%, as compared to the initial values.     

In Silico Design of an Oseltamivir Derivative with Increased Affinity against Wild-Type and Mutant Variants of Neuraminidase and Hemagglutinin of Influenza A H1N1 Virus

Antiviral resistance has turned into a world concern nowadays. Influenza A H1N1 emerged as a problem at the world level due to the neuraminidase (NA) mutations. The NA mutants conferred resistance to oseltamivir and zanamivir. Several efforts were conducted to develop better anti-influenza A H1N1 drugs. Our research group combined in silico methods to create a compound derived from oseltamivir to be tested in vitro against influenza A H1N1. Here we show the results of a new compound derived from oseltamivir but with specific chemical modifications, with significant affinity either on NA (in silico and in vitro assays) or HA (in silico) from influenza A H1N1 strain. We include docking and molecular dynamics (MD) simulations of the oseltamivir derivative at the binding site onto NA and HA of influenza A H1N1. Additionally, the biological experimental results show that oseltamivir derivative decreases the lytic-plaque formation on viral susceptibility assays, and it does not show cytotoxicity. Finally, oseltamivir derivative assayed on viral NA showed a concentration-dependent inhibition behavior at nM, depicting a high affinity of the compound for the enzyme, corroborated with the MD simulations results, placing our designed oseltamivir derivative as a potential antiviral against influenza A H1N1.     

Comparison of mechanistic and hybrid modeling approaches for characterization of a CHO cultivation process: Requirements,pitfalls and solution paths

Despite the advantages of mathematical bioprocess modeling, successful model implementation already starts with experimental planning and accordingly can fail at this early stage. For this study, two different modeling approaches (mechanistic and hybrid) based on a four-dimensional antibody-producing CHO fed-batch process are compared. Overall, 33 experiments are performed in the fractional factorial four-dimensional design space and separated into four different complex data partitions subsequently used for model comparison and evaluation. The mechanistic model demonstrates the advantage of prior knowledge (i.e., known equations) to get informative value relatively independently of the utilized data partition. The hybrid approach displayes a higher data dependency but simultaneously yielded a higher accuracy on all data partitions. Furthermore, our results demonstrate that independent of the chosen modeling framework, a smart selection of only four initial experiments can already yield a very good representation of a full design space independent of the chosen modeling structure. Academic and industry researchers are recommended to pay more attention to experimental planning to maximize the process understanding obtained from mathematical modeling.     

Population genetic structure of the butterfly Melitaea didyma (Nymphalidae) along a northern distribution range border

The population genetic structure of the butterfly Melitaea didyma was studied along the northern distribution range border in Central Germany by means of allozyme electrophoresis. Individuals were sampled from a total of 21 habitat patches from four regions, and two provinces. Sampling was designed to estimate local vs. regional differentiation. High levels of variability were found, H _e= 0.14–0.21. The mean expected sample heterozygosity from one region, Mosel, was significantly lower than from the Hammelburg region, H _e= 0.17 and 0.19, respectively. Two hierarchical levels of genetic differentiation were found. Within regions individuals sampled from different patches behaved as belonging to one population with high levels of gene flow (Hammelburg F _ST= 0.015, Mosel F _ST= 0.044), though local isolation barriers did create a substructuring of these populations. The inbreeding coefficients, F _IS, were constant over all sample levels, suggesting a similar distribution of habitat patches within regions. Between regions gene flow was limited. An isolation by distance analysis indicated that the hierarchical structure, at the provincial level, may be breaking down due to isolation of regional populations. A more general observation was that the sampling design may greatly have influenced the estimation of genetic differentiation. Depending on which samples were included, overall F _ST estimates ranged from 0.059–0.090.     

饱和试验设计资料的逐步回归分析

对饱和试验设计资料,一次最小二乘分析是不合理的,采用逐步回归分析法,在选择适当的理论F值前提下,不仅可以检验每个回归系数的显著性,而且能够获得最优回归方程．